How To Reset Your Home Security System In Lansing
A nice benefit of having your home security system installed professionally is that you seldom have to concern yourself with it. With that being said, there will likely be a couple situations where you need to reset your alarms in Lansing. When using the ADT Command interface, your system reset typically needs only a couple tap of a button when you’ve experienced common events like false alarms and battery changes.
Check Your Manual Before Trying to Reset Your Alarm Panel
Here’s a simple yet valuable tip before you start resetting your Lansing home security system, read your instruction manual first. You don't want to compromise your property’s defense as a result of touching something incorrectly. Also, control panels might change if you moved from a numerical keypad to a digital command hub. And if you’re struggling to reset your system, don't be reluctant to call the experts.
Resetting Your Lansing Security System Due To A False Alarm
Generally, a false alarm occurs because of the accidental tripping of a sensor. You can engage the ADT Command touchscreen or bring up the ADT mobile app and hit the shield option and submit your security code to deactivate the alarms when this occurs. You might be contacted by your security monitoring team, but just let them know it was a false alarm.
Tips To Reset Your Alarm Following A Power Outage In Lansing
When you lose power from a storm or other event, you may start hearing a repeated, high-pitched beep from your central command hub. This signifies that the alarm is using the battery backup. To reset the alarm and halt the steady beeps, you must deactivate and reactivate your system.
Keep in mind, if power is out for a longer period of time, you may need a full reset of your home’s security. Follow the directives in the manual -- typically by submitting your PIN number and hitting the designated button twice -- and you should be back to normal. You might still hear chirping caused by the secondary power source, as it might not end until the battery charges entirely. Contact your home security agent if you keep having difficulties with your ADT controls 20 hours after your power is back on.
When You Need To Reset Your Home Security System After Replacing A Battery
On occasion you will have to replace a battery within one of your home security components. In order to accomplish this, you want to change your system to Test Mode so you avoid triggering an accidental alarm. When the new battery is put in place, remove the system out of test mode and revert back to your usual settings. If the system doesn't notice the component or the battery indicator is still on, you might require a full reset of your security system.
Tips to Reset Your Lansing Security System When Adding Or Removing A User
Removing or adding personal codes can be completed on your ADT Command interface and your ADT mobile app. You should never have to perform a system reset after adding or removing codes. However, if you find yourself moving to a new house with an existing ADT system, you'll want to contact your residential security experts at (517) 295-3112 to set up a new contract. The installation tech will visit your property to switch out components, set up more devices (as required), and do a factory reset.
A Well-Designed Security System Is Only A Call Away
Figuring out how to reset a home security system in Lansing will likely be a challenge if it isn’t equipped with user-friendly instructions and features. If you’re ready to acquire your intuitive home protection system, dial (517) 295-3112 or submit the form below. Our team is ready to design the right security system for your property.